Aftercare Guide
How to Maintain PPF and Ceramic Coating
Straightforward aftercare that keeps paint protection film and ceramic coating performing — safe washing, the products to avoid, winter care and inspection.
5.0★
Google customer rating
Since 2013
Specialist studio experience
GYEON
Partner Studio
Documented
Warranty & aftercare handover
The Basics
Safe wash basics
Use the two-bucket method with a pH-neutral shampoo and clean microfibre or wash mitt. Pre-rinse thoroughly, snow foam where possible, then contact wash from the cleanest panels down. This applies to both PPF and ceramic-coated vehicles — the goal is to lift dirt away without dragging it across the surface.
Products
Avoiding harsh chemicals
Avoid acidic wheel cleaners, solvent-based degreasers and anything not labelled coating-safe or pH-neutral. These can degrade a ceramic coating and dull PPF over time. Use dedicated maintenance products — GYEON aftercare where appropriate — and clean wheels with a separate bucket and brush.
Frequency
How often to wash
Wash every two to four weeks depending on use. Washing too infrequently lets contamination bond; washing too aggressively can cause marring. Regular, gentle, safe washing keeps both the film and coating performing and makes each wash easier.
Drying
Drying properly
Never let a protected car air-dry — water spots can etch into the coating or film. Use a clean, soft drying towel or a blower, working gently. A dedicated drying aid safe for coatings helps sheet water and reduces spotting.
Contamination
Bug and bird lime removal
Soften deposits with warm water or a dedicated bug remover before wiping. Never scrub dry contamination. Bird lime is acidic and can etch within hours — rinse and remove it promptly. For PPF, self-healing can be encouraged with warm water on light marks.
Winter
Winter maintenance
Winter road salt and grime are highly corrosive. Rinse the underside and arches regularly, wash more frequently during cold months, and avoid letting salt sit on the film or coating. A pre-winter decontamination and a coating top-up help maintain performance through the worst conditions.
Long-Term
Inspection and aftercare support
Both PPF and ceramic coating benefit from annual inspection. We check film condition, coating performance and warranty compliance, and advise on any maintenance needed. Read our full PPF aftercare guide or contact us to arrange an inspection.
Frequently Asked
Maintenance FAQs
Wash as needed using a safe, contact method — ideally every two to four weeks depending on use. Regular safe washing prevents contamination bonding and keeps the surface performing well.
Avoid automated brush car washes. Brushes can lift film edges over time and introduce swirl marks. Touchless washes are acceptable as a quick option but do not replace proper contact washing.
Avoid harsh degreasers, acidic wheel cleaners, solvent-based products and anything not labelled pH-neutral or coating-safe. Use dedicated maintenance shampoos and GYEON aftercare products where possible.
Soften the deposit with warm water or a dedicated bug remover first, then gently wipe with a soft microfibre. Never scrub dry contamination — it can scratch the film or coating. Rinse promptly after removal.
Yes. Annual inspections check film condition, coating performance and warranty compliance where applicable. We provide inspection support as part of our aftercare.
Need protection advice for your vehicle?
Send us your vehicle details or photos and we'll recommend the most suitable route for your usage, paint condition and ownership goals.
Advice first. Booking only when you’re ready.
- 1. Enquire
Your name and chosen reply details are enough to start. - 2. Review
We review suitability and normally reply within one working day. - 3. Decide
Agree your written quotation before booking. No obligation.
Private · Advice-led · No pressure · Response within one working day
